Contents
Recruit teammates
In this game, friendly forces and team members are not the same thing. Anyone with the same clothes color as you is an ally, but you need to manually recruit team members. Most precise and detailed instructions only apply to team members
Press G on an ally to recruit him. You can see the number and status of players in the lower left corner
following following
At this time, your team members are following you, and they will go wherever you go.
moving moving
At this time, the team members are heading to the location you designated (how to specify will be mentioned below)
holding standby/defense
At this point, your teammates have arrived at the location you designated and are squatting there. Note that if you don't use the regroup command (how to use it will be explained below) they will always be squatting there.
Real-Time Strategy
After you recruit team members, you can quickly issue instructions to them (only valid for team members! If you are not recruited, if you give orders, it will be treated as if you are putting p)
go to
First, long press G, and you will see a box in the middle of the screen with words inside.
go to Let your team members go to the location you pointed at
regroup
Press and hold G under your feet to display the regroup set. This command is equivalent to canceling the command you just gave. It can also be used to make the above-mentioned holding teammates follow you again.
attack
While long pressing G, you will also find some more points on the screen. You can give commands like this to let your teammates occupy the points.
attack xxx (name of point)
Capture this point. After the order is given, the team members will go straight to this point and capture it.
Defend
defend xxx (dot’s name)
After issuing this order, your team members will go straight to this point and defend it.
#### commander
commander xxx (vehicle name)
This is the point! Many people are curious about why all the teammates next to them got off the bus as soon as they got on the bus. It's because they didn't recruit any team members. After using this command, friendly forces in the vehicle and those about to board the vehicle will join your squad.
This command is much faster and more convenient than recruiting them one by one in advance and ordering them to get on the bus.
enter & exit
enter xxx and exit xxx (vehicle name)
It's easy, let your teammates load and download the tools
The above is the real-time command. Its characteristic is that it is fast and convenient. It can order the team members to get on and off the equipment. The disadvantage is that the control distance is short. If it is far away from you, you cannot use this to give orders.
tactical command
Tactical command also needs to recruit players. The recruitment method is the same as above.
But what is different from real-time command is that you must equip a telescope or you won’t be able to use it.
Telescope as shown in the picture
After equipping the telescope, take out the telescope and press the left button to open the map, or directly press b to open the map (you can open it by pressing b without holding the telescope)
After opening the map, you can directly left-click anywhere on the map where you want your team members to go. At this time, a white arrow will appear on the map, and your team members will go straight to this place.
You can also right-click any point on the map and several options will appear.
As shown below, move to simply lets your teammates pass by
attack point Go past and capture this point
The two situations in the above picture are for the enemy's points or neutral points, and our own points are as shown in the figure.
move to simple past
defend point defend this point
The above is tactical command. The characteristic of tactical command is that it can control the entire map.
strategic command
You don’t need to bring anything with you for strategic command
First press the Enter key to call out the deployment menu
See that little map on the right? There is a battle plan on the map. Click it and the map will look like this.
At this time, you can start from a point on your side by holding down the left button and moving, so that you can drag out a white arrow
Drag this white arrow to the enemy point and release the left button. The arrow will stay there. At this time, the friendly troops resurrected from the point where the arrow starts will capture the point pointed by the arrow. But in fact, if you don’t pull the arrow, there will be friendly troops to attack, but there will definitely be more people to attack if you pull the arrow.
Similarly, you can also let friendly forces defend a point. Click the left button on a point, and a shield will appear on the point. At this time, most of the friendly forces resurrected from this point will defend this point. If you want to cancel this shield, right click on the shield.
Although it is said that all friendly forces will obey strategic orders, even if you give an order to capture, there will still be a few people left to guard the point, and even if you give an order to defend, there will still be people to grab the point. In order to make everyone follow your orders, there is an always follow plan in the upper left corner of the map. This command will cause all friendly forces to strictly follow your orders.
Reposted from Tieba [in case the post is cleared again one day]: https://tieba.baidu.com/p/5514138370?pn=1